DT Swiss X 412 Novatec 791/792 Pillar Sapim | MTB Wheels

321,36329,76

Available on backorder

Available on backorder

  • Weight – 1720 g – 1860 g
  • Rims – DT Swiss X 412
  • Hubs – Novatec 791/792
  • Spokes – Pillar / Sapim – 28H
  • Wheel size – 29″ / 700C
  • Rim height – 18,5 mm
  • Nipples – Aluminium / Brass
DT Swiss X 412 Novatec 791/792 Pillar Sapim MTB, XC and Gravel Bike Wheels 29 inch / 700c Rzeszow Warszawa Krakow
DT-Swiss-X412-Novatec-791-792_3
DT-Swiss-X412-Novatec-791-792_4

DT Swiss X 412 Novatec 791/792 Pillar Sapim | MTB Wheels – Technical Specification

  • Dedicated set of MTB, as well as Gravel and XC size 29″ / 700C bicycle wheels we produce on individual order in polish bicycle wheel factory in Rzeszow.
  • In the set-up we present both MTB Wheels have 28 spokes each, which is a guarantee of great strength and stiffness while keeping the whole set low and also attractive in weight.

DT Swiss X 412 29″ / 700C Rims

  • MTB wheels are built on very stiff durable and lightweight rims from the Swiss company DT Swiss.
  • The inner width of the DT Swiss X 412 rim is 22.5mm, allowing you to fit tyres of many sizes – whether for MTB, XC or Gravel.
  • Rim height is only 18.5 mm, which saves a lot of weight.
DT Swiss X 412 29 inch / 700C aluminium rim for DT Swiss X 412 Novatec 791/792 Pillar MTB wheel
Cross-section DT Swiss X 412 29" / 700C aluminium rim for DT Swiss X 412 Novatec 791/792 Pillar Sapim gravel wheel

Novatec 791/792 hubs

  • MTB, Gravel and XC DT Swiss X 412 Novatec 791/792 Pillar Sapim wheels are built on high-quality Novatec 791/792 hubs.
  • We install a standard Shimano HG 11s freehub body ratchet (we also include shims for 9s and 10s) or a Sram XD.
  • The brake discs on Novatec 791/792 hubs are mounted with 6 screws. This is the most optimal solution because if the front or rear disc is bent, it is easy to remove with a 5mm Allen wrench or torx t20-25.
Novatec D791SB front hub in wheel for MTB 29 / 700C DT Swiss X392 Novatec 791/792 Pillar bike Jelenia Góra Walbrzych
Novatec D792SB rear hub in wheel for MTB C DT Swiss X392 Novatec 791/792 Pillar Zakopane Nowy Targ Krynica Zdrój

Wide choice of front and rear hub axles

We build the DT Swiss 29 MTB wheel set on axles adapted to our customers’ bikes. Choose from hubs on the following axles:

  • Front: 100XQR | 100X12MM | 100X15MM,
  • Rear: 135XQR | 135X12MM | 142X12MM | 148X12MM (Boost).

Testing and Lubrication of MTB Wheel Hubs DT Swiss X 412 Novatec 791/792 Pillar Sapim

  • Each hub is individually inspected by us after factory installation. We disassemble and inspect the bearing pressure with a bearing hand press and correct any factory deficiencies.
  • In hubs, we lubricate the space between the pressure caps and the bearings, which additionally protects against water and dirt penetration.

Pressure in MTB Wheels DT Swiss X 412 Novatec 791/792 Pillar Sapim

The pressure ranges provided for the road wheel set are:

  • 2.5 bar – 7.0 bar under TLR kit,
  • 3.0 bar – 8.5 bar on inner tubes.

Spokes and nipples in DT Swiss X 412 Novatec 791/792 Pillar Sapim MTB Wheels

  • The presented MTB – wheelset is equipped with Pillar or Sapim brand spokes, which are characterized by high quality steel from which the spokes are made.
  • Depending on the customer’s choice, the weight of the target user and the purpose of their bike, we use and recommend the following spoke options:
    • 2.0/1.5mm for lightweight riders up to 80kg,
    • 2.0/1.6mm up to 95kg,
    • 2.0/1.8mm 95kg plus,
  • The weight limit for wheels is 110 kg.
  • On request we offer rim taping for the preparation of TLR / Tubeless kits.

Additional information

Weight 1,86 kg
Dimensions 72 × 32 × 72 cm
Hub - Front

100XQR, 100X12MM, 100X15MM

Hub - Rear

135XQR, 142X12MM, 148X12MM (Boost)

Freehub

Shimano 9/10/11s, Sram XD

Spokes

2.0/1.6MM, 2.0/1.8MM

Nipples

Aluminium (0,48 gram), Brass (1,3 gram)

Rim height

18,5 mm

Number of spokes
Mocowanie Tarczy
Materiał obręczy

Recommended for you